Initial SetupUpdated 5 months ago

1. Plug the charging cord into the USB-C port to charge the device. Once the red light turns off, the device is fully charged.
2. With the dome facing upward, unscrew the two screws on the outside of the projector to split the device into two parts.
3. Once apart, place the top flat piece between the boot and the plate of the roller skate so that it wraps over the top of the plate, and match up the bottom dome piece underneath.
4. Hold and screw both pieces together to keep the projector in place. Do not over tighten the screws as they can strip the plastic.
5. Press the power button located on the side of the projector.
6. Click the power button to cycle through the 9 various light settings.
7. Hold the power button for 3 seconds to turn off the device.
8. Get to riding!

LED Starlight Projectors Instruction Card 

How Long Will My LED Starlight Projectors Last and How Long Do They Need to Charge?

Your LED Starlight Projectors will last 3-4 hours on a full charge, and depending on the speed of your USB, should be fully charged in under an hour.